Hello! I buyed Arcam SA30, but I can’t use this device. My network settings seems to be lost as the unit displays the following I.P : 0.0.0.0, and net V0, and ARC v.0 Moreover I am unable to reinstall the firmware via USB and reset the net (the unit freezes). There is nothing I can do at this poi…

Direct reprogramming of HOST and LCD micros fromonboard PCB headers。If you are in China, I can help you~

Maybe your best bet is to not use the streaming features and just put a streaming DAC or a streamer and a DAC in front of it, something like a WIIM pro plus which supports just about every protocol would be a good fit and cheap It seems strange that Net reset isn’t working though. Maybe the network…

Hello! It sounds pretty complicated! Does this method require special equipment? I’m not from China(((

Hello! How set a fixed IP? Light indicator to back of the unit on Ethernet output does not turn green when connected. The flash drive does not light up when connected. IP address is v.0.0.0.0. Google Home sees this device, but when I connect it, it says that the device has already been used, rese…

Wi-Fi Analyzer sees the unit and its IP, but this IP not allows enter in web interface.

I managed to find the original recovery instructions incl. downloads on the Harman support site https://support.harmanaudio.com/fi/fi/howto/recover-arcam-sa30-net-module-after-stalled-net-v1542-update-emea/000017526.html

I don’t know if this helps. It is information I got from the Arcam support some years ago… ”In that case, I suspect the ARC module may have crashed. I recommend trying the following: Enter the engineering menu by simultaneously press MENU INPUT- & DIRECT. Once in the engineering menu: press DIRE…

[image] Movier: Hello! How set a fixed IP? I seem to remember that you need to do it on the web page, which could be an issue. I originally thought you could set it on the system menu, but I could not see it when I looked

Thank you! But this method don’t work. The unit does not see the flash drive or the Ethernet cable.

Aracam SA30 IP 0.0.0.0, ARC v.0

Issues

madfiddler August 15, 2025, 5:37pm 7

Search the forum! There is a thread from a long while back that talks about an update leaving the amp in this state. Following recovery process and correct update, in theory you should be ok.

Topic		Replies	Views
Upgraded to V1.62 - but Arc set to v0 Issues firmware	27	2579	September 13, 2024
Arcam SA30 remains in standby and is non-responsive Issues	4	2409	March 2, 2025
Stuck on "Net Updating" Issues firmware	44	5276	April 10, 2022
SA30 build 1206 version 1.7 Software firmware	59	3578	March 11, 2022
How to do a full reset and reload of firmware Software firmware	28	8943	April 8, 2022

Aracam SA30 IP 0.0.0.0, ARC v.0

Related topics