# SA30 build 1206 version 1.7 **URL:** \ **Category:** Software\ **Tags:** firmware\ **Created:** [July 16, 2021, 11:27am UTC](https://arcam.discourse.group/t/sa30-build-1206-version-1-7/566 "2021-07-16T11:27:17Z")\ **Posts on this page:** 1\ **Showing post:** 54
**Author:** ![paulguk](https://avatars.discourse-cdn.com/v4/letter/p/278dde/32.png) [@paulguk](https://arcam.discourse.group/u/paulguk)\ **Post date:** [January 16, 2022, 8:45pm UTC](https://arcam.discourse.group/t/sa30-build-1206-version-1-7/566/54 "2022-01-16T20:45:23Z")
You could try the engineer reset described in this link. > [@How to do a full reset and reload of firmware](https://arcam.discourse.group/t/how-to-do-a-full-reset-and-reload-of-firmware/293): > > I have been in email contact with one of Arcam’s field engineers about an issue I have with DIRAC. Within these email conversations I mentioned how I was always reluctant to upgrade or download firmware more than necessary due to my fear of a power outage or something else going wrong and ‘bricking’ the amp (I lost a PC motherboard years ago doing a BIOS update). He gave me some instructions on how to perform a full reset and then re load the firmware. ‘If the installation is interrupted, it s… --- _[View the full topic](https://arcam.discourse.group/t/sa30-build-1206-version-1-7/566)._