# Net Reset for Update

**URL:** <https://arcam.discourse.group/t/net-reset-for-update/224>\
**Category:** Issues\
**Tags:** firmware\
**Created:** [January 2, 2021, 5:11pm UTC](https://arcam.discourse.group/t/net-reset-for-update/224 "2021-01-02T17:11:57Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![jvs1](https://yyz2.discourse-cdn.com/free1/user_avatar/arcam.discourse.group/jvs1/32/10_2.png) [@jvs1](https://arcam.discourse.group/u/jvs1)\
**Post date:** [January 3, 2021, 11:16am UTC](https://arcam.discourse.group/t/net-reset-for-update/224/2 "2021-01-03T11:16:21Z")

</div>

Hi Peter, welcome to the forum! Did you use the usb method for upgrading? If not then please use the usb method else try another upgrade method. Refer to the topic below.

> [@How to update SA30 firmware manually](https://arcam.discourse.group/t/how-to-update-sa30-firmware-manually/42):
>
> This article describes a number of methods on how to update the SA30 firmware. Please note the last step is essential for the update: the unit MUST be restored to factory defaults and any setup changes made again after an update. [Post upgrade](#post_upgrade) After the firmware upgrade Google Cast has to be reconfigured. If you do not reconfigure Google Cast then you won’t be apply to cast to the SA30 through Google Cast. Refer to the next article how to reconfigure Google Cast: [To update via USB (recommended…](#usb)

---

_[View the full topic](https://arcam.discourse.group/t/net-reset-for-update/224)._