# Disabled input still vissible on list

**URL:** <https://arcam.discourse.group/t/disabled-input-still-vissible-on-list/809>\
**Category:** Issues\
**Created:** [January 30, 2022, 4:38pm UTC](https://arcam.discourse.group/t/disabled-input-still-vissible-on-list/809 "2022-01-30T16:38:25Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![OkropNick](https://avatars.discourse-cdn.com/v4/letter/o/958977/32.png) [@OkropNick](https://arcam.discourse.group/u/OkropNick)\
**Post date:** [January 30, 2022, 4:38pm UTC](https://arcam.discourse.group/t/disabled-input-still-vissible-on-list/809/1 "2022-01-30T16:38:25Z")

</div>

**Scenario**  
Perform the following steps:

1. switch on Arcam SA30 with firmware version:

Version – v1.72  
Network – v1206  
ARC – V1.7  
ARC Rx – V1.0.0

1. go to “menu / system settings / enable input” and disable everything except: CD, STB, NET
2. go out of menu and iterate on all available input sources - it will be as expected: CD, STB, NET
3. power off Arcam SA30 using gray power switch on amplifier
4. turn on Arcam SA30 again and iterate on all enabled input sources

**Actual result**  
Available inputs: CD, STB, NET, ARC

**Expected result**  
Available inputs: CD, STB, NET