# Daikin Aircon remote control interfears with ARCAM

**URL:** <https://arcam.discourse.group/t/daikin-aircon-remote-control-interfears-with-arcam/171>\
**Category:** Uncategorized\
**Created:** [November 9, 2020, 6:33pm UTC](https://arcam.discourse.group/t/daikin-aircon-remote-control-interfears-with-arcam/171 "2020-11-09T18:33:45Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![hoffmap7](https://avatars.discourse-cdn.com/v4/letter/h/ad7895/32.png) [@hoffmap7](https://arcam.discourse.group/u/hoffmap7)\
**Post date:** [November 9, 2020, 6:33pm UTC](https://arcam.discourse.group/t/daikin-aircon-remote-control-interfears-with-arcam/171/1 "2020-11-09T18:33:46Z")

</div>

Hi,

I had a Daikin AC installed today, and I noticed that when I increase the temperature of the AC with the remote control it switches on the ARCAM !!  
Is there anything to configure to avoid that !

Thank you,  
Patrick

---

<div class="post-metadata">

**Author:** ![Pierre\_Sahlin](https://yyz2.discourse-cdn.com/free1/user_avatar/arcam.discourse.group/pierre_sahlin/32/93_2.png) [@Pierre\_Sahlin](https://arcam.discourse.group/u/Pierre_Sahlin)\
**Post date:** [November 9, 2020, 10:57pm UTC](https://arcam.discourse.group/t/daikin-aircon-remote-control-interfears-with-arcam/171/2 "2020-11-09T22:57:19Z")

</div>

Yes you can change channel on the remote for the SA30. Take a look in the manual for a how to.

---

<div class="post-metadata">

**Author:** ![hoffmap7](https://avatars.discourse-cdn.com/v4/letter/h/ad7895/32.png) [@hoffmap7](https://arcam.discourse.group/u/hoffmap7)\
**Post date:** [November 10, 2020, 5:36pm UTC](https://arcam.discourse.group/t/daikin-aircon-remote-control-interfears-with-arcam/171/3 "2020-11-10T17:36:55Z")

</div>

I called ARCAM today and the advice the engineer provided was to set net standby to ON.  
Apparently the issue I mentioned is known and will be fixed in the next release.  
Also this setting makes the SA30 booting faster when switching on, but might consume more power when being in standby.  
At least it fixes my pb.

---

<div class="post-metadata">

**Author:** ![jvs1](https://yyz2.discourse-cdn.com/free1/user_avatar/arcam.discourse.group/jvs1/32/10_2.png) [@jvs1](https://arcam.discourse.group/u/jvs1)\
**Post date:** [November 11, 2020, 2:25pm UTC](https://arcam.discourse.group/t/daikin-aircon-remote-control-interfears-with-arcam/171/4 "2020-11-11T14:25:02Z")

</div>

Sounds to be related / similar to the next issue. I have no update regarding the issue below.

> [@SA30 wakes up from other remote control activity, ref#56](https://arcam.discourse.group/t/sa30-wakes-up-from-other-remote-control-activity-ref-56/40):
>
> Scenario Perform the following steps: switch on Arcam SA30 version 1.21 is used configure SA30 Network Settings, Net Standby is off use SA30 remote to switch SA30 into standby (front led becomes red=ok) use 3rd party remote from another brand (e.g. Sony TV, Philips BluRay player) and try to switch on the SA30 Actual result SA30 switches on. Expected result SA30 should not wake up from other device’s remotes when Net Standby is off. Additional information If Net Standby is on then SA30 …

---

<div class="post-metadata">

**Author:** ![hoffmap7](https://avatars.discourse-cdn.com/v4/letter/h/ad7895/32.png) [@hoffmap7](https://arcam.discourse.group/u/hoffmap7)\
**Post date:** [November 11, 2020, 4:47pm UTC](https://arcam.discourse.group/t/daikin-aircon-remote-control-interfears-with-arcam/171/5 "2020-11-11T16:47:46Z")

</div>

the engineer from Arcam seem to have confirmed that any IR remote is doing that.

Patrick