# Arcam AVR & SA30 remote codes

**URL:** <https://arcam.discourse.group/t/arcam-avr-sa30-remote-codes/827>\
**Category:** Uncategorized\
**Created:** [February 14, 2022, 1:48pm UTC](https://arcam.discourse.group/t/arcam-avr-sa30-remote-codes/827 "2022-02-14T13:48:27Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![BlackSpider](https://avatars.discourse-cdn.com/v4/letter/b/74df32/32.png) [@BlackSpider](https://arcam.discourse.group/u/BlackSpider)\
**Post date:** [February 14, 2022, 1:48pm UTC](https://arcam.discourse.group/t/arcam-avr-sa30-remote-codes/827/1 "2022-02-14T13:48:27Z")

</div>

Hi,  
My SA30 & AVR550 remotes are both clashing each other. when i use the remote for either of them they do the same commands for both components. Is there a way i can change the SA30 remote only to operate the SA30 or vice versa for the AVR550?

Thanks.

---

<div class="post-metadata">

**Author:** ![derekc23](https://avatars.discourse-cdn.com/v4/letter/d/f4b2a3/32.png) [@derekc23](https://arcam.discourse.group/u/derekc23)\
**Post date:** [February 15, 2022, 9:13am UTC](https://arcam.discourse.group/t/arcam-avr-sa30-remote-codes/827/2 "2022-02-15T09:13:01Z")

</div>

Page 23 shows you how to change the code on the remote and amplifier (page 20). Default is 16.

Derek

---

<div class="post-metadata">

**Author:** ![BlackSpider](https://avatars.discourse-cdn.com/v4/letter/b/74df32/32.png) [@BlackSpider](https://arcam.discourse.group/u/BlackSpider)\
**Post date:** [February 15, 2022, 9:25am UTC](https://arcam.discourse.group/t/arcam-avr-sa30-remote-codes/827/3 "2022-02-15T09:25:37Z")

</div>

Manage to do it, was complicated but got it done 🙂